Console House 10 Mode Instructions d'exploitation télécharger pdf (Page 98)

To enter phone numbers, press the keypad keys 0 - 9. You can put in a

dash (-) for legibility by pressing the OFF key. Press the ' # ' key after

you have pressed all of the digits in the phone number.

For example, to enter the number 555-1234, press 555 'OFF' 1234 #.

Dial Out Number 1 is one of the 8 numbers that are stored in the

system. In the event of an alarm, these numbers are dialed in the

order that is set up in the Dial Out Order for the particular type of

alarm.

Dial out numbers 1 - 8 have On and Off times and days, so that no

time is wasted calling you at the office at night or on a Sunday if the

alarm is activated.

For dial out number 1, you should enter your office number where you

can be reached during working hours.

Enter the phone number the same way as described for My Phone

Number.

You can cause the system to pause for two seconds between digits of

the number by pressing the DAY key, which puts a T in the number.

Multiple Ts for longer pauses are allowed. You can also press the

NIGHT key (*) and the AWAY key (#) for symbols to get through

some types of telephone or pocket beeper/pager systems.

If you wish to remove a phone number for a particular dial out

number, press OFF then ' # ' (with the display showing a Dial Out

Number) to enter a single dash (-).

Phone numbers can be up to 24 digits.

DIAL OUT 1 ON

DIAL OUT 1 OFF

Dial out number 1 has two times associated with it, an On and Off

time. The Omni will only call this number if the time and days are

between the Dial Out 1 On and Dial Out 1 Off times and dates.

Dial Out Number 1

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 135 136

Pas de commentaire

Console House 10 Mode Instructions d'exploitation Page 98