Console House 10 Mode Instructions d'exploitation télécharger pdf (Page 89)

Pressing the 3 (ZONE) key allows you to select the button for a

security zone activation event. You are first prompted to enter the

desired zone number:

ZONE:

ENTER ZONE

↓

The zone number should be entered followed by the ' # ' key, or the

arrow keys may be used to scroll through a list of zones.

The desired zone is then displayed and you are prompted to specify the

state that activates the button:

WHEN Front Door:

0=SECURE 1=NOT RDY

Pressing the 4 (ALL) key allows you to specify a button activated by

issuing an All On or an All Off command. You are first prompted to

specify whether the button is for All Lights On or for All Off:

ALL

0=ALL OFF 1=LIGHTS ON

If area arming is being used, you will be prompted to specify the

desired area:

AREA:

ENTER AREA 0=ALL

↓

Pressing the 5 (ALARM) key allows you to specify a button activated

upon the occurrence of an alarm. You are first prompted to select the

type of alarm:

SELECT ALARM TYPE

ANY TYPE

↓

The arrow keys are used to select from a list of alarm types:

Security Zone

Buttons

All On/Off

Buttons

Alarm Buttons

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 135 136

Pas de commentaire

Console House 10 Mode Instructions d'exploitation Page 89