Console House 10 Mode Instructions d'exploitation télécharger pdf (Page 71)

canceled. The Omni will say "CANCEL" when this happens. If you

wish to cancel the emergency alarm before you have activated it, press

any other key, wait a few seconds or hang up.

Note that the Panic Button Over The Phone feature only works if you

are logged into the system. In an emergency, if you wish to set off the

alarm, simply pick up the phone and repeatedly press the # key until

the alarm sounds. Be aware that, under some circumstances, it may be

smarter to dial 911 or your police department directly. Also be aware

that your telephone will be unusable while the Omni dials out.

Once the emergency alarm has been activated, you must disarm the

system as described in Security to silence the alarm. If the dial out

delay has passed, then the in house phone will be disconnected, and

you must disarm the system from the console to silence the alarms.

The Omni is capable of communicating with an IBM compatible

personal computer (PC). The PC can be local (in-house) or remote.

The PC must be equipped with a modem and running Home

Automation, Inc. PC Access software. The Omni has a built-in

modem. If you wish to use your PC to configure, program and check

the status of your Omni, contact your dealer for the appropriate

software for your PC.

Emergency dial out consists of two distinct parts: the "digital dialer"

and the "voice dialer."

The digital dialer (also called a "digital communicator") reports alarm

events to a central station monitoring center. The digital dialer sends

a digitally coded message to the central station's receiver and

computer. The computer in the central station presents your name,

address, and other information to a human operator who notifies the

appropriate authorities.

PC Access

Emergency

Dial-Out

Digital Dialer

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 135 136

Pas de commentaire

Console House 10 Mode Instructions d'exploitation Page 71